The Martini Crossover Hardware & Supplies
The Martini Crossover
Hardware & Supplies
Everything you need for your Martini Crossover, organized into a simple shopping list. Quantities are for one project.
Shop the Martini Crossover Hardware KitShop fabric, zippers and sewing tools separately.
Before you shop: The hardware kit includes the four extra rectangle rings for handles that drop flat. Shop zipper tape separately.
01 Fabrics
- Exterior: 1 1/2 yd. of vinyl, cork, quilting cotton or home décor fabric.
- Accent: 1/4 yd. of print fabric for the exterior slip pocket, such as quilting cotton or home décor fabric.
- Lining: 1/2 yd. of quilting cotton or waterproof canvas.
02 Interfacing & Stabilizers
- 1–2 yd. woven interfacing such as Pellon ShapeFlex SF101.
- 1/2 yd. Pellon Flex Foam FF78F1, Decovil Light or fusible fleece.
- Approx. 4 1/2" × 12" Decovil Heavy 526 for the base (optional, adds stability).
03 Hardware
- 2 × 1" D-Rings, O-Rings or rectangle rings.
- 1 × 1" Strap Slider.
- 4–8 rivets or Chicago screws. Choose 6–7 mm posts for thinner fabrics or 8–9 mm posts for thicker fabrics.
- 2 × 1" Swivel Clasps, 4–6 Purse Feet, 2 × 1" Strap Ends and 4 additional 1" Rectangle Rings to allow the grab-and-go handles to drop (optional, recommended).
04 Zippers
- Main closure: 12" of #5 zipper tape + 1 matching zipper pull.
- Exterior front and lining pockets: 2 cuts of 8" of #3 or #5 zipper tape + 2 matching zipper pulls.
05 Sewing Tools
Follow the pattern instructions for cutting and assembly.
