The Laverna Crossover Hardware & Supplies

The Laverna Crossover

Hardware & Supplies

Everything you need for your Laverna Crossover, organized into a simple shopping list. Quantities are for one project.

Shop the Laverna Crossover Hardware Kit

Shop fabric, zippers and sewing tools separately.

Before you shop: The current hardware kit says its strap hardware is sized for 1" straps, while this original supply list specifies 3/4". Check your pattern version and strap width before ordering the kit.

01   Fabrics

  • Exterior: Approx. 1 yd. (100 cm), plus a 55" × 3" (140 × 7.6 cm) piece for the crossbody strap.
  • Lining: Approx. 1 yd. (100 cm).

02   Interfacing & Stabilizer

  • Approx. 1–2 yd. (100–200 cm) lightweight woven fusible interfacing: Sew Woven or Pellon ShapeFlex SF101. Generally not required for vinyl, cork or waterproof canvas; it can help stabilize faux leather, faux suede or vinyl with subtle one-way stretch.
  • Approx. 1/2 yd. (50 cm) lightweight stabilizer such as Decovil Light

03   Hardware

  • 2 × 3/4" (20 mm) Figure 8 Connectors.
  • 2 × 3/4" (20 mm) O-Rings or rectangle rings.
  • 1 × 3/4" (20 mm) tri-glide/strap slider.
  • 1–2 × 3/4" (20 mm) strap ends and 1 Bag Tag (optional, recommended).
  • 6 rivets or Chicago screws. Choose 6–7 mm posts for thinner fabrics or 8–9 mm posts for thicker fabrics.

04   Zippers & Binding

  • Main closure: 14" (35.5 cm) of #5 zipper tape + 1–2 matching zipper pulls.
  • Back exterior and lining pockets: 2 cuts of 8 1/2" (22 cm) of #3 or #5 zipper tape + 2 matching zipper pulls.
  • Approx. 2 yd. (185 cm) of 1/2" (12.7 mm) double-fold bias binding or 1" (25 mm) Fold-Over Elastic if not making waterproof canvas binding.

Follow the pattern instructions for cutting and assembly.