Screw Together Round Grommets - Set of 2
Add a professional finish to your handmade bags with these premium screw-together grommets. Designed specifically for bag makers, these two-piece threaded grommets screw together by hand without specialty setting tools. Both pieces have a smooth, finished appearance, making them ideal for creating secure attachment points for gate rings, adding strap connectors, reinforcing openings, and incorporating professional hardware details into handbags, totes, backpacks, and other bag-making projects.
| Product Type | Two-Piece Screw-Together Grommets |
| Installation | Threaded, screw-together design; no specialty setting tools required |
| Finish | Smooth, finished appearance on both sides |
| Outside Diameter | 26.5mm |
| Inside Diameter | 14.2mm |
| Channel Width | 3.9mm |
| Material | Zinc Alloy |
| Available Finishes | Nickel, Light Gold, Rose Gold, Gunmetal, Antique Brass, and Rainbow |
| Best Uses | Handbags, totes, backpacks, drawstring bags, organizers, and other bag-making projects |
How to Install Screw-Together Grommets
These grommets consist of two threaded pieces that screw together, similar to screwing a lid onto a jar. Although they may look like a single piece when assembled, the two halves can be separated by twisting them in opposite directions. No grommet press or specialty setting tools are required.
- Separate the grommet: Hold the grommet with both hands and twist the two halves in opposite directions to unscrew them.
- Prepare the opening: Cut a hole through the fabric and stabilizer according to the inside diameter of the grommet.
- Position the pieces: Insert one half of the grommet from the front of your project and the other half from the back.
- Secure the threads: Apply a small amount of Loctite® thread locker to the threads to help prevent the grommet from loosening with use.
- Screw together: Align the threaded pieces and twist them together, just as you would screw a lid onto a jar. Hand-tighten until securely snug. Do not overtighten.
- Reinforce the area: Always reinforce the grommet area with a medium- to heavyweight stabilizer to provide proper support and reduce stress on the fabric.
Important Installation Tips
Having trouble separating the pieces? The grommets may arrive fully screwed together and appear to be one solid piece. Hold each side firmly and twist in opposite directions to separate the threaded halves.
Check your project thickness: The fabric and stabilizer layers should completely fill the 3.9mm channel between the two grommet halves. If your project layers are not thick enough to create a snug fit, add one to two layers of Decovil Heavy or one layer of foam stabilizer behind the grommet area before installation.
These bag-making grommets provide a clean, professional appearance from every angle. The front and back surfaces are both finished, making them ideal for projects where both sides of the hardware may be visible.
Actual colors may vary due to screen calibration, brightness settings, and device displays. The Rainbow finish may have slight variations, making each piece unique. Antique Brass coloring may vary between hardware pieces due to the hand-applied plating process.
